• Design – Warsabers, Russia;
• The ability to combine two lightsabers into a staff using a special connector (selling separately);
• Lenght: 299 mm;
• OD: 36-40 мм.
• Blade depth (aprox) – 56 mm/39 mm (PixelBlade/Tri-CREE);
• Blade retention screw – M4, 1 pcs. Hex key included;
• Сovertech wheel included. Covertech belt clip selling separately;
• Hilt is designed for hard dueling.

Video reviews of various hilts

Electronics:

• Warsabers CerbeRUS soundboard (Russia). Smoothswings + Accent swings algorithm support;
• Pogo-Pin connector for PixelBlade RGB blade or for NeoCree Converter (Compatible with standard connectors from TCSS and similar);
• Optional copper Converter Module with Tri-Cree RGB LED when Tri-Cree RGB is selected;
• Removable battery 21700, 5000 mAh;
• Micro-USB port on the hilt for charging and connecting to PC. Micro-USB cable included. Power adapter not included. (Adapter parameters: Output voltage – 5V, output current 0.5-1 A. Suitable for charging: PC, PS4, Xbox, Powerbank, telephone adapter with the necessary parameters);
• Premium bass speaker D=28 mm, 2 W, 8 Om;

Video reviews of electronics and soundboards

Blade:

• For PixelBlade RGB equipment: NeoPixel RGB blade (92 cm long, 3 mm wall thickness and a bullet tip). RGB LED strips are installed inside the blade along the entire length and allow you to customize any blade color;
• For Tri-Cree equipment: standard empty blade (85 cm long, 2 mm wall thickness). Powerful Tre-Cree RGB LED are installed at the blade holder and allow you to customize any blade color.

The post Inquisitor hilt appeared first on Warsabers.

Hilt:

• Design – Warsabers in coloboration with Maksim Tsvetkov, Russia;
• Manufacturing – Warsabers, Russia;
• Lenght: 320 mm;
• OD: 38 мм;
• Blade landing depth (aprox) – 35 mm;
• Retention screw – M4, 1 pcs. Hex key included;
• Hilt is designed for hard dueling.

Video reviews of various hilts

Electronics:

• Soundboard Warsabers Cerberus (Russia) or Proffieboard* (USA). Smoothswings + Accent swings algorithm support;

*The price includes only basic firmware and a standard set of sound fonts from the official site of the soundboard developer. All other sounds, sound fonts and firmware are purchased separately and installed independently through the firmware of the board. Without updating firmware you can only replace pre installed sound fonts (not add new ones). Fonts can be replaced simply by your own by replacing files inside SD folders. Download Proffieboard datashet

• ShtokCustomWorx Pogo-Pin connector with LEDs (Compatible with standard connectors from TCSS and similar);
• Removable battery 18650, 3400 mAh.;
• Micro-USB port on the hilt for charging and connecting to PC. Micro-USB cable included. Power adapter not included. (Adapter parameters: Output voltage – 5V, output current 0.5-1 A. Suitable for charging: PC, PS4, Xbox, Powerbank, telephone adapter with the necessary parameters);
• Premium bass speaker D=28 mm, 2 W, 4 Om;

Video reviews of electronics and soundboards

The post Kyle Katarn V3 hilt appeared first on Warsabers.

• Design – Warsabers, Russia;
• Lenght: 295 mm;
• OD: 28-38 mm;
• Blade depth (aprox) – 70/55 mm (Neopixel/Tri-CREE);
• Blade retention screw – M4, 1 pcs. Hex key included;
• Leather not installed. Leather stripe is included for self-installation;
• The ability to combine two lightsabers into a staff using a special connector (selling separately);
• Сovertech wheel and belt clip selling separately;
• Hilt is designed for hard dueling.

Video reviews of various hilts

Electronics:

• Warsabers CerbeRUS soundboard (Russia). Smoothswings + Accent swings algorithm support;
• Pogo-Pin connector for NeoPixel RGB blade or for NeoCree Converter (Compatible with standard connectors from TCSS and similar);
• Optional Copper Converter Module with Tri-Cree RGB LED when Tri-Cree RGB is selected.
• Removable battery 21700, 5000 mAh;
• Micro-USB port on the hilt for charging and connecting to PC. Micro-USB cable included. Power adapter not included. (Adapter parameters: Output voltage – 5V, output current 0.5-1 A. Suitable for charging: PC, PS4, Xbox, Powerbank, telephone adapter with the necessary parameters);
• Premium bass speaker D=28 mm, 2 W, 8 Om;

Video reviews of electronics and soundboards

Blade:

• For NeoPixel RGB equipment: NeoPixel RGB blade (92 cm long, 3 mm wall thickness and a bullet tip). RGB LED strips are installed inside the blade along the entire length and allow you to customize any blade color;
• For Tri-Cree equipment: standard empty blade (85 cm long, 2 mm wall thickness). Powerful Tre-Cree RGB LED are installed at the blade holder and allow you to customize any blade color.

The post Destiny hilt appeared first on Warsabers.

Hilt:

• Design – Warsabers, Russia;
• Lenght: 285 mm;
• OD: 38 мм;
• Blade landing depth (aprox) – 44 mm/29 mm (Neopixel/Tri-CREE);
• Blade retention screw – M4, 1 pcs. Hex key included;
• Сovertech wheel included. Covertech belt clip selling separately;
• Hilt is designed for hard dueling.
• The color Weathered is made with a special burnishing compound, with active use it can be gradually wiped out to pure metal. It also has the ability to leave marks on hands when used with wet hands;

Video reviews of various hilts

Electronics:

• Soundboard Warsabers Cerberus (Russia) or Proffieboard* (USA). Smoothswings + Accent swings algorithm support;

*The price includes only basic firmware and a standard set of sound fonts from the official site of the soundboard developer. All other sounds, sound fonts and firmware are purchased separately and installed independently through the firmware of the board. Without updating firmware you can only replace pre installed sound fonts (not add new ones). Fonts can be replaced simply by your own by replacing files inside SD folders. Download Proffieboard datashet

• ShtokCustomWorx Pogo-Pin connector with LEDs (Compatible with standard connectors from TCSS and similar);
• Removable battery 21700, 5000 mAh.;
• Micro-USB port on the hilt for charging and connecting to PC. Micro-USB cable included. Power adapter not included. (Adapter parameters: Output voltage – 5V, output current 0.5-1 A. Suitable for charging: PC, PS4, Xbox, Powerbank, telephone adapter with the necessary parameters);
• Premium bass speaker D=28 mm, 2 W, 4 Om;

Video reviews of electronics and soundboards

Blade:

• For NeoPixel RGB equipment: NeoPixel RGB blade (92 cm long, 3 mm wall thickness and a bullet tip). RGB LED strips are installed inside the blade along the entire length and allow you to customize any blade color;
• For Tri-Cree equipment: standard empty blade (85 cm long, 2 mm wall thickness). Powerful Tre-Cree RGB LED are installed at the blade holder and allow you to customize any blade color.

The post Starkiller hilt V4 appeared first on Warsabers.