Inquisitor hilt

Out of stock

Inquisitor hilt

(4 customer reviews)

223 $

  • Hilt material – aluminum (anodized painting);
  • The blade is not included. To add a blade, check the boxes next to the “PixelBlade RGB” or / and “Dueling kit”;
  • Warsabers NeoCore soundboard (Russia) with Smoothswings algorithm support;
  • Removable battery INR21700-50E, 5000 mAh;
  • Micro-USB / Type-C port on the case for charging and connecting to a PC. Micro-USB cable included. The power adapter is not included. (Adapter parameters: Output voltage – 5V, output current 1-2 A);
  • Bass speaker 28 mm, 2 W.
SKU: N/A Category:

Description

Hilt:

  • Design – Warsabers, Russia;
  • The ability to combine two lightsabers into a staff using a special connector (selling separately);
  • Lenght: 299 mm;
  • OD: 36-40 мм.
  • Blade depth (aprox) – 56 mm/39 mm (PixelBlade/Tri-CREE);
  • Blade retention screw – M4, 1 pcs. Hex key included;
  • Сovertech wheel included. Covertech belt clip selling separately;
  • Hilt is designed for hard dueling.

The photo may differ slightly from the finished product, due to manual processing of the product and the peculiarities of color transfer by the camera and screen

Video reviews of various hilts

Electronics:

  • Warsabers CerbeRUS soundboard (Russia). Smoothswings + Accent swings algorithm support;
  • Pogo-Pin connector for PixelBlade RGB blade or for NeoCree Converter (Compatible with standard connectors from TCSS and similar);
  • Optional copper Converter Module with Tri-Cree RGB LED when Tri-Cree RGB is selected;
  • Removable battery 21700, 5000 mAh;
  • Micro-USB port on the hilt for charging and connecting to PC. Micro-USB cable included. Power adapter not included. (Adapter parameters: Output voltage – 5V, output current 0.5-1 A. Suitable for charging: PC, PS4, Xbox, Powerbank, telephone adapter with the necessary parameters);
  • Premium bass speaker D=28 mm, 2 W, 8 Om;

Video reviews of electronics and soundboards

Blade:

  • For PixelBlade RGB equipment: NeoPixel RGB blade (92 cm long, 3 mm wall thickness and a bullet tip). RGB LED strips are installed inside the blade along the entire length and allow you to customize any blade color;
  • For Tri-Cree equipment: standard empty blade (85 cm long, 2 mm wall thickness). Powerful Tre-Cree RGB LED are installed at the blade holder and allow you to customize any blade color.

4 reviews for Inquisitor hilt

  1. Russian

    Павел

    Долго ехал меч, конечно. Но оно того стоит. Очешуительно.

  2. Russian

    Дмитрий

    Получил меч, очень счастлив. Много писать не буду, скажу вот что: Сделано классно, лежит в руке приятно, настройки гибкие. Купил Inquisitor за 20к. Люди делающие меч отвечали на все мои вопросы, во время всего этапа производства. Правда ждал 7 месяцев. Но тут вина не их, а короновируса. Приехал быстро. Как отдал остаток за меч, через 4 дня он был у меня. По мечу: Цвета яркие, сочные. Правда при съемке на телефон меняется спектр, но тут скорее всего виновата техника. По фото, можно примерно, увидеть дальность освещения. В целом доволен покупкой, думаю потом закажу у WarSabers еще меч.

  3. Russian

    Всевелод

    Очень доволен мечом. Он стоит своих денег. Результат оправдал, даже больше чем оправдал ожидания.
    Еще отмечу безупречную – четкую и оперативную работу всех служб.
    Спасибо!

  4. Russian

    Светлана (verified owner)

    Получили меч ровно через 8 недель! Все параметры соответствуют описанию, качество на высоте! Сын очень доволен, давно о таком мечтал! Спасибо большое!

Show only reviews in English (0)

Add a review

Your email address will not be published. Required fields are marked *