Starkiller hilt V4
550 $ – 700 $
- Hilt material – aluminum (anodized painting);
- Metal crystal chamber with natural quartz crystal with additional illumination;
- The blade is not included. To add a blade, check the boxes next to the “PixelBlade RGB” or / and “Dueling kit”;
- Warsabers NeoCore or ProffieBoard soundboard with Smoothswings algorithm support ;
- Removable battery INR21700-50E, 5000 mAh;
- Micro-USB / Type-C port on the case for charging and connecting to a PC. Micro-USB cable included. The power adapter is not included. (Adapter parameters: Output voltage – 5V, output current 1-2 A);
- Bass speaker 28 mm, 2 W.
The most accurate copy of Galen Marek (Starkiller) lightsaber – the main character of the the game “Star Wars: The Force Unleashed”.
- Design – Warsabers, Russia;
- Lenght: 285 mm;
- OD: 38 мм;
- Blade landing depth (aprox) – 44 mm/29 mm (Neopixel/Tri-CREE);
- Blade retention screw – M4, 1 pcs. Hex key included;
- Сovertech wheel included. Covertech belt clip selling separately;
- Hilt is designed for hard dueling.
- The color Weathered is made with a special burnishing compound, with active use it can be gradually wiped out to pure metal. It also has the ability to leave marks on hands when used with wet hands;
- Soundboard Warsabers Cerberus (Russia) or Proffieboard* (USA). Smoothswings + Accent swings algorithm support;
*The price includes only basic firmware and a standard set of sound fonts from the official site of the soundboard developer. All other sounds, sound fonts and firmware are purchased separately and installed independently through the firmware of the board. Without updating firmware you can only replace pre installed sound fonts (not add new ones). Fonts can be replaced simply by your own by replacing files inside SD folders. Download Proffieboard datashet
- ShtokCustomWorx Pogo-Pin connector with LEDs (Compatible with standard connectors from TCSS and similar);
- Removable battery 21700, 5000 mAh.;
- Micro-USB port on the hilt for charging and connecting to PC. Micro-USB cable included. Power adapter not included. (Adapter parameters: Output voltage – 5V, output current 0.5-1 A. Suitable for charging: PC, PS4, Xbox, Powerbank, telephone adapter with the necessary parameters);
- Premium bass speaker D=28 mm, 2 W, 4 Om;
- For NeoPixel RGB equipment: NeoPixel RGB blade (92 cm long, 3 mm wall thickness and a bullet tip). RGB LED strips are installed inside the blade along the entire length and allow you to customize any blade color;
- For Tri-Cree equipment: standard empty blade (85 cm long, 2 mm wall thickness). Powerful Tre-Cree RGB LED are installed at the blade holder and allow you to customize any blade color.
|Dimensions||100 × 8 × 8 cm|